Downloads

https://doi.org/10.53941/pcm.2025.100004
Lattanzi, L., & Jarfors, A. E. W. Room and High-Temperature Wear Behaviour of Al-Based MMCs against an Automotive Brake Pad. Progress in Composite Materials. 2025. doi: https://doi.org/10.53941/pcm.2025.100004
Volume 1, Issue 1, 2025
Copyright (c) 2025 by the authors.
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Article

Room and High-Temperature Wear Behaviour of Al-Based MMCs against an Automotive Brake Pad

Lucia Lattanzi * and Anders Eric Wollmar Jarfors

Department of Materials and Manufacturing, School of Engineering, Jönköping University, Gjuterigatan 5, 55318 Jönköping, Sweden

* Correspondence: lucia.lattanzi@ju.se

Received: 29 November 2024; Revised: 27 December 2024; Accepted: 31 December 2024; Published: 6 January 2025

Abstract: Aluminium metal matrix composites are promising materials for automotive brake discs, and it is critical to assess their wear performance in different braking conditions. This article presents the wear behaviour of aluminium-based composites with different Al-Si matrix alloys added with nickel and copper to retain mechanical strength at high temperatures. The wear tests were conducted at room and high temperatures (250 and 400 °C) to simulate different braking conditions on a pin-on-plate tribometer. The coefficient of friction is in the range of 0.15–0.17 for all materials at room temperature. The specific wear rates of the brake pad and the disc materials indicate that material transfer occurs from the brake pad to the metal counterpart. Microscopy investigations of the wear tracks confirm the material transfer on the composites. It protects the composite surface from wear damage and maintains a stable coefficient of friction. To translate these results into real-world scenarios, the findings of this study suggest that aluminium-based metal matrix composite brake discs have a longer product lifespan compared to the grey cast iron brake discs; the brake pads for the composites would be the components to need replacement due to wear during the product life instead of the brake discs.

Keywords:

aluminium metal matrix composite wear friction tribology microscopy

References

  1. Serrenho, A.C.; Norman, J.B.; Allwood, J.M. The impact of reducing car weight on global emissions: The future fleet in Great Britain. Philosophical Transactions of the Royal Society A: Mathematical. Phys. Eng. Sci. 2017, 375, 20160364. https://doi.org/10.1098/rsta.2016.0364.
  2. Grigoratos, T.; Martini, G. Brake wear particle emissions: A review. Environ. Sci. Pollut. Res. 2015, 22, 2491–2504. https://doi.org/10.1007/s11356-014-3696-8.
  3. Perricone, G.; Matějka, V.; Alemani, M.; et al. A concept for reducing PM10 emissions for car brakes by 50%. Wear 2018, 396–397, 135–145. https://doi.org/10.1016/j.wear.2017.06.018.
  4. European Vehicle Emissions Standards–Euro 7 for Cars, Vans, Lorries and Buses n.d. Available online: https://ec.europa.eu/info/law/better-regulation/have-your-say/initiatives/12313-European-vehicle-emissions-standards-Euro-7-for-cars-vans-lorries-and-buses_en (accessed on 23 June 2022).
  5. Vencl, A.; Rac, A.; Bobić, I. Tribological behaviour of Al-based MMCs and their application in automotive industry. Tribol. Ind. 2004, 26, 31–38.
  6. Ravikiran, A.; Surappa, M.K. Effect of sliding speed on wear behaviour of A356 Al-30 wt.% SiCp MMC. Wear 1997, 206, 33–38. https://doi.org/10.1016/S0043-1648(96)07341-3.
  7. Narciso, J.; García-Cordovilla, C.; Louis, E. Reactivity of thermally oxidized and unoxidized SiC particulates with aluminium-silicon alloys. Mater. Sci. Eng. B 1992, 15, 148–155. https://doi.org/10.1016/0921-5107(92)90047-D.
  8. Martín, A.; Martínez, M.A.; Llorca, J. Wear of SiC-reinforced Al-matrix composites in the temperature range 20–200 °C. Wear 1996, 193, 169–179. https://doi.org/10.1016/0043-1648(95)06704-3.
  9. García-Cordovilla, C.; Narciso, J.; Louis, E. Abrasive wear resistance of aluminium alloy/ceramic particulate composites. Wear 1996, 192, 170–177. https://doi.org/10.1016/0043-1648(95)06801-5.
  10. Dolata, A.J.; Wieczorek, J.; Dyzia, M.; et al. Assessment of the Tribological Properties of Aluminum Matrix Composites Intended for Cooperation with Piston Rings in Combustion Engines. Materials 2022, 15, 3806. https://doi.org/10.3390/ma15113806.
  11. Awe, S.; Thomas, A. The Prospects of Lightweight SICAlight Discs in the Emerging Disc Brake Requirements. E Transp. 2021, 13, 14. https://doi.org/10.46720/5965299eb2021-mds-012.
  12. Du, A.; Lattanzi, L.; Jarfors, A.E.W.; et al. Role of matrix alloy, reinforcement size and fraction in the sliding wear behaviour of Al-SiCp MMCs against brake pad material. Wear 2023, 530–531, 204969. https://doi.org/10.1016/j.wear.2023.204969.
  13. Lattanzi, L.; Etienne, A.; Li, Z.; et al. The effect of Ni and Zr additions on hardness, elastic modulus and wear performance of Al-SiCp composite. Tribol. Int. 2022, 169, 107478. https://doi.org/10.1016/j.triboint.2022.107478.
  14. Agnihotri, R. Mechanical Properties of Al-SiC Metal Matrix Composites Fabricated by Stir Casting Route. Res. Med. Eng. Sci. 2017, 2, 1–6. https://doi.org/10.31031/rmes.2017.02.000549.
  15. Lee, T.; Lee, J.; Lee, D.; et al. Effects of particle size and surface modification of SiC on the wear behavior of high volume fraction Al/SiCp composites. J. Alloys Compd. 2020, 831, 154647. https://doi.org/10.1016/J.JALLCOM.2020.154647.
  16. Gultekin, D.; Uysal, M.; Aslan, S.; et al. The effects of applied load on the coefficient of friction in Cu-MMC brake pad/Al-SiCp MMC brake disc system. Wear 2010, 270, 73–82. https://doi.org/10.1016/j.wear.2010.09.001.
  17. G133; Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear. ASTM International: West Conshohocken, PA, USA, 2010. https://doi.org/10.1520/G0133-05R10.2.
  18. Lattanzi, L.; Awe, S.A. Thermophysical properties of Al-based metal matrix composites suitable for automotive brake discs. J. Alloys Metall. Syst. 2024, 5, 100059. https://doi.org/10.1016/J.JALMES.2024.100059.
  19. Awe, S.; Eilers, E.; Gulden, F. Sustainable Aluminium Brake Discs and Pads for Electrified Vehicles. Eurobrake 2023; FISITA: Barcelona, Spain, 2023. https://doi.org/10.46720/EB2023-TST-020.
  20. Granta Selector A 2023 R1 (Duralcan Al-20SiC (p) cast (F3K20S)), version 23.1, Ansys: Canonsburg, PA, USA
  21. Granta Selector A. 2023 R1(EN GJL 250 2023), version 23.1, Ansys: Ansys: Canonsburg, PA, USA
  22. SiCAlight–AC Floby n.d. Available online: https://www.sicalight.com/ (accessed on 1 March 2024).